 |
NOTIFIER FSI-851, made by Notifier for integration
with Multicom ICS systems, are analog, addressable, low-profile (height
measures only 1.66"/42.164 mm) smoke detectors designed for the entire
line of intelligent systems from NOTIFIER. More...
|
| |
 |
The
FST-851 Heat Detector made by Notifier for integration with Multicom ICS
systems) is attractive, durable, and features combination rate-of-rise
and fixed-temperature detectors. Heat detectors are available in 135ºF
(57ºC) and 190 ºF (84ºC) temperature ratings. |
| |
 |
The
NOTIFIER NBG-12LX (made by Notifier for integration with Multicom ICS
systems) is a state-of-the-art, dual-action (i.e., requires two motions
to activate the station) pull station that includes an addressable interface
for any NOTIFIER intelligent control panel. More... |
| |
 |
Wheelock's
new devices, the NS/NS4 Series Horn Strobes and the NH
Series Horns (from Notifier for integration with Multicom ICS
systems), feature low current design with reduced inrush. The horn devices
provide a selectable continuous horn tone or a temporal pattern (Code
3) tone when constant voltage from a Fire Alarm Control Panel (FACP) is
applied. Each tone has two dB settings to chose from. More... |
| |
 |
Electromagnets are designed for virtually any remote door release application.
They are primarily used to hold fire and smoke barrier doors open until
released by a remote smoke detector or other switching device.More... |
| |
 |
The
FMM-1 Monitor Module (made by Notifier for integration with Multicom ICS
systems) is intended for use in intelligent, two-wire systems, where the
individual address of each module is selected using the built-in rotary
switches. It provides either a two-wire or four-wire fault-tolerant Initiatin
Device Circuit (ICD) for normally-open-contact-fire alarm and supervisory
devices.The module has a panel-controlled LED indicator. The FMM-1 can
be used to replace MMX-1 modules in existing systems. More... |
| |
 |
The
FMM-101 Monitor Module (made by Notifier for integration with Multicom
ICS systems) can be installed in a single-gang junction directly behind
the monitored unit. Its small size and light weight allow it to be installed
without rigid mounting. The FMM-101 is intended for use in intelligent,
two-wire systems where the individual address of each module is selected
using rotary switches. It provides a two-wire initiating device circuit
for normally-open-contact fire alarm and security devices. The FMM-101
can be used to replace MMX-101 module in existing systems. More... |
| |
|
The
FZM-1 Interface Module (made by Notifier for integration with Multicom
ICS systems) is intended for use in intelligent, addressable systems,
where the individual address of each module is selected using built-in
rotary switches. This module allows intelligent panels to interface and
monitor two-wire conventional smoke detectors. It transmits the status
(normal, open, or alarm) or one full zone of conventional detectors back
to the control panel. The FZM-1 has a panel-controlled LED indicator and
can be used to replace MMX-2 modules in existing systems. More... |
| |
 |
The
FDM-1 Dual Monitor Module (made by Notifier for integration with Multicom
ICS systems) is intended for use in intelligent, two-wire systems. It
provides two independent two-wire initiating device circuits (IDCs) at
two separate, consecutive addresses. It is capable of monitoring normally
open contact fire alarm and supervisory devices; or either normally open
or normally closed security devices. The module has a single panel-controlled
LED. More... |
| |
 |
The
FCM-1 Control Module (made by Notifier for integration
with Multicom ICS systems) provides NOTIFIER intelligent control panels
a circuit for Notification Appliances (horns, strobes, speakers, etc.)
or to monitor a telephone circuit. Addressablility allows the FCM to be
activated, either manually or through panel programming, on a select (zone
or area of coverage) basis. More... |
| |
|
FRM-1 Addressable Relay Module (made by Notifier for
integration with Multicom ICS systems) provides NOTIFIER Engineering that
greatly enhances that speed of communication between analog intelligent
devices. Intelligent devices communicate in a grouped fashion. If one
of the devices within the group has new information, the panel CPU stops
the group poll and concentrates on single points. The net effect is response
speed greater than five times that of other
designs. More... |